Twelve pure fifths and seven octaves / 十二个纯五度与七个八度 / 純正五度十二回と七オクターブ
Article and generation date: 2026-10-29

Files
  tuning-fifths-lab.py                    Complete calculation / WAV generator / checks
  tuning-fifths-results.json              Actual numerical and encoded-audio results
  tuning-fifths-pure-partials.wav         Coincident partial reference
  tuning-fifths-tempered-partials.wav     Near-frequency partial pair
  tuning-fifths-README.txt                 This file

Run
  python3 tuning-fifths-lab.py > rerun.json

Python standard library only, no network, packages or credentials. WAV files are
written beside the script. The script overwrites only its two named WAV outputs.
Recorded environment: macOS 27.0.1, arm64, CPython 3.12.14.
Other platforms may differ in environment fields and final PCM rounding / hashes;
compare numerical results within floating-point/16-bit quantization tolerance.

Mathematical model and results
  Ideal octave: 2:1. Pure fifth: 3:2. Reference A4=440 Hz is chosen for examples.
  Twelve fifths / seven octaves = (3/2)^12 / 2^7 = 531441/524288, not 1.
  The exact ratio is computed with fractions.Fraction, not a rounded frequency.
  Cents(r) = 1200*log2(r).
  Pure fifth: 701.955000865... cents; ET fifth: 700 cents, ratio 2^(7/12).
  Narrowing: 1.955000865... cents per fifth; comma: 23.460010384... cents.
  All 13 chain rows (0 through 12 fifths) are kept, folded into a single octave.
  Starting at 440 Hz, twelve pure fifths folded down seven octaves give
  446.003036499... Hz. Equal-tempered fifths return to 440 Hz after folding.
  References 220/440/880 Hz demonstrate constant cents but scaled Hz differences.

Audio construction
  These are ORIGINAL SYNTHETIC SINE PAIRS, not recordings or complete A/E notes.
  Pure reference components: 1320 Hz and 1320 Hz, initially in phase.
  Tempered-pair components: 1320 Hz and 1318.510227651... Hz.
  These model the lower A4 third harmonic and the upper E5 second harmonic.
  Predicted beat frequency: 1.4897723485... Hz; period: 0.6712434963... seconds.
  48000 samples/s, mono, 16-bit little-endian PCM WAV, 8 seconds, 384000 frames.
  Linear 20 ms fade at both ends; each complete signal scaled to digital RMS 0.12
  before quantization. This is NOT perceptual loudness matching.
  Each published file is 768044 bytes, with the actual SHA-256 in the report.
  No recorded performance, licensed music, or borrowed sound samples are included.

Checks that actually ran
  Exact nonclosure; comma equals twelve fifth narrowings in cents; ET octave
  and twelve-fifth closure within floating-point tolerance; cumulative cents
  difference of all 13 folded chain rows.
  Re-open each actual WAV, verify format, 384000 frames, endpoints, no clipping,
  decoded RMS, and peak. Numerical probes use decoded PCM, not the source array.
  Goertzel amplitude at the KNOWN component frequencies and an off-frequency
  2000 Hz probe. This is a specified-frequency projection, not an independent
  frequency estimator, FFT peak identification or a frequency-resolution claim.
  Actual decoded 20 ms RMS windows centered on the predicted maximum (1/beat)
  and minimum (0.5/beat). In this run min/max is 0.999836... for the pure control
  and 0.027232... for the tempered pair. No claim that finite windows reach zero.
  The script stops on a failed assertion.

Scope
  Ideal integer harmonics, exact 2:1 octaves, and fixed reference only.
  No real piano tuning, strings/inharmonicity model, loudspeaker/room measurement,
  human audibility threshold, preference study, or performance test.
  Digital sample/RMS tests do not establish how a particular person will hear it.
  The audio intentionally isolates only two partials. Do not describe it as
  a full piano fifth or as an actual instrument recording.

Primary sources read 2026-10-29
  UNSW Music Acoustics: Note names, MIDI numbers and frequencies
  https://www.phys.unsw.edu.au/jw/notes.html
  Kenneth P. Scholtz, Music Theory Online 4.4 (July 1998), Algorithms for Mapping
  Diatonic Keyboard Tunings and Temperaments; sections 3 and 4. HTML text read.
  https://mtosmt.org/retrofit/mto.98.4.4/mto.98.4.4.scholtz.php
  UNSW: Tartini tones and temperament (interval ratios and tuning choices)
  https://www.phys.unsw.edu.au/jw/tartini-temperament.html
  UNSW Physclips: Interference beats and Tartini tones
  https://www.animations.physics.unsw.edu.au/jw/beats.htm
  UNSW: How harmonic are harmonics?
  https://phys.unsw.edu.au/jw/harmonics.html
  UNSW Acoustics FAQ: frequency/interval ratios and stretch tuning
  https://phys.unsw.edu.au/jw/musFAQ.html

The script, numerical results and WAV samples are independently generated for
the article. No source illustrations, textbook exercises or audio are bundled.
